[. . . ] Always there to help you Register your product and get support at www. 1) Main unit a Measuring cup with water level indicator Lid Blender jar with non-detachable collar Seal ring g Motor unit with control panel e f Blade unit Before first use Thoroughly clean the parts that will come in contact with food before you use the appliance for the first time (see “Cleaning” in Fig. 4) 1 2 3 4 Follow the steps in “Preparing your cooking blender”. [. . . ] 3 4 3 4 5 6 Note:  • To remove the blender jar from the motor unit, lift it off the motor unit. € It is normal that scratches occur on the heating element or the bottom surface of the blade unit after use. HIGH : Tomato creamy soup Chicken soup Apple compote Bolognaise 7 8 LOW: Keeping warm, melting butter for desserts or crepe pancake batter MED: Simmering, cooking small amount of ingredients like baby food or sauces HIGH: Boiling food faster LOW : MED : Français Deutsch Voreingestellter Kochmodus (Abb. 5) 1 2 3 4 5 Follow the steps in “Preparing your cooking blender”. Adjust the heating level by pressing -/+ button and then press OK button to confirm. € The LED display will turn off if there is no operation in 5 minutes. You can wake up the appliance and continue operating by pressing any function key. € Be aware that the lid and the blender jar will be hot after cooking • Be aware of the steam release when you lift the lid and measuring cup Warning: Do not touch the bottom of blender jar and the heating element after cooking. Pour out the cooked ingredients/soup from the blender jar to avoid overcooking. 6) 1 2 3 Follow the steps in “Preparing your cooking blender”. When the LED display is blinking and showing 00:00, the appliance is ready to use. »» The blending process starts and the blending time will count up on the LED display. Note: To avoid overheating, the appliance will turn off automatically after working for 3 minutes. 3 4 6 7 8 3 4 4 5 • 7 8 Or you can set the blending time by pressing -/+ button and then select a speed setting. [. . . ] € Do not use metal wool or brush to wash the blade unit to avoid scratching. 7) 1 2 3 Follow the steps in “Preparing your cooking blender”. press and hold the Pulse/Ice crush button to start processing (step 3 in Fig. [. . . ]